Brix to SG Converter
SG = 1 + Brix ÷ (258.6 − Brix ÷ 258.2 × 227.1). A reading of 12 °Brix is a specific gravity of about 1.048. A quick estimate is Brix × 4 = gravity points.
Brix to SG Converter
Specific gravity
Brix / Plato
Gravity points
How it is calculated
SG = 1 + Brix ÷ (258.6 − (Brix ÷ 258.2) × 227.1)
Brix = −616.868 + 1111.14 × SG − 630.272 × SG² + 135.997 × SG³
Worked example
Inputs — Convert: Brix to specific gravity; Reading: 12.
Results — Specific gravity: 1.048; Brix / Plato: 12.0 °; Gravity points: 48.
Brix, Plato and specific gravity: three scales, one measurement
Brewers, winemakers, cidermakers and distillers all need to know how much sugar is dissolved in their liquid, because sugar is what yeast turns into alcohol. The problem is that the craft uses three different scales to describe the same thing. Specific gravity (SG) is the density of the liquid compared with water, the scale on a brewing hydrometer — water is 1.000, and a typical beer wort might read 1.050. Brix (°Bx) and Plato (°P) both express dissolved sugar as a percentage by weight; Brix is the winemaker’s and refractometer scale, Plato the brewer’s. For practical purposes Brix and Plato are close enough to treat as the same number — they diverge only in the second or third decimal place.
Converting between them is routine but not trivial, because the relationship is a cubic, not a straight line. The standard conversion is SG = 1 + Brix ÷ (258.6 − (Brix ÷ 258.2) × 227.1), and the reverse uses the ASBC polynomial that also powers our OG to Plato Converter. The calculator above runs both directions; the sections below explain when you need each scale and how to avoid the classic mistakes.
The quick rule: Brix × 4 = gravity points
For fast mental maths, multiply Brix by four to get gravity points — the digits after the decimal in SG. So 12 °Brix is about 48 points, or SG 1.048; 20 °Brix is about 80 points, SG 1.080. The rule is accurate to within a point or two across the normal brewing and winemaking range, which is close enough for planning a recipe. For the actual reading you record in a log or feed into an ABV calculation, use the full formula, because small errors compound when you work out potential alcohol.
| Brix / Plato | Specific gravity | Gravity points |
|---|---|---|
| 5 ° | 1.020 | 20 |
| 10 ° | 1.040 | 40 |
| 12 ° | 1.048 | 48 |
| 15 ° | 1.061 | 61 |
| 20 ° | 1.083 | 83 |
| 25 ° | 1.107 | 107 |
Refractometer or hydrometer?
Which instrument you use decides which scale you read and how you must handle the number. A hydrometer floats in a sample and reads specific gravity directly; it needs a few hundred millilitres of liquid and a temperature correction if the sample is not at the instrument’s calibration temperature — our Hydrometer Temperature Correction tool handles that. A refractometer reads Brix from a single drop by measuring how light bends through the liquid, which is wonderfully convenient on brew day. But a refractometer has a catch: once fermentation starts and alcohol is present, the alcohol distorts the reading, so a raw Brix figure from fermenting or finished beer is wrong until it is corrected. Our Refractometer ABV Calculator applies that alcohol correction so you can still get an accurate ABV from refractometer readings.
Sources & further reading: American Homebrewers Association; John Palmer, How to Brew
Why the scale you use matters for alcohol
Dissolved sugar is the raw material of fermentation, so the gravity or Brix of your starting liquid sets a ceiling on how strong the finished drink can be. The difference between the starting gravity and the finishing gravity, run through a simple formula, gives the alcohol by volume. That is why getting the conversion right is not academic: a one-point error in original gravity shifts your potential alcohol by more than a tenth of a percent, and errors stack across a batch.
Once you have an accurate starting gravity, two tools take it the rest of the way. The Potential Alcohol Calculator estimates the ABV a juice or wort can reach from its Brix and expected final gravity — the figure winemakers watch most closely. For beer, the Beer ABV Calculator works from original and final gravity to report ABV, attenuation and calories in one step. Both rely on clean, correctly converted gravity numbers to begin with.
Brewing versus winemaking conventions
The two crafts lean on different scales out of habit and history. Brewers tend to work in specific gravity and Plato, because beer recipes, efficiency figures and software are built around them. Winemakers and cidermakers work in Brix, because their refractometers and the grape and fruit industries are calibrated that way — harvest decisions in a vineyard are made on Brix readings. When a brewing resource quotes Plato and a winemaking resource quotes Brix, they are describing the same physical sugar content; the conversion above lets you move between the two worlds without re-measuring. If you are chaptalising a must — adding sugar to raise potential alcohol — the Chaptalization Calculator works out how much to add to hit a target gravity.
Temperature: the error everyone forgets
Every density-based reading assumes a reference temperature, usually 20 °C (68 °F). A warm sample is less dense and reads low; a cold sample reads high. With a hydrometer you must correct for this, and with a refractometer you should let the drop reach room temperature or use an automatic-temperature-compensating model. Skipping the correction is the single most common reason a brewer’s calculated ABV does not match reality: a wort measured hot off the boil can read several points below its true gravity. Record the sample temperature alongside the reading, correct it, and only then convert between scales or feed the number into an alcohol calculation.
Putting it together
A reliable workflow looks like this: take a reading with whichever instrument suits the moment, correct it for temperature, convert to the scale your recipe or software expects, and log it. On brew day a refractometer and a Brix reading are fastest; for fermentation tracking a hydrometer and specific gravity are more robust because they are immune to the alcohol distortion that affects refractometers. Keep both scales straight and the maths downstream — potential alcohol, attenuation, final ABV — falls into place. The converter above is the bridge between the instrument in your hand and the number your recipe needs.
Common Brix and gravity questions
Are Brix and Plato interchangeable?
For practical brewing and winemaking, yes. Both express dissolved sugar as a percentage by weight, and they differ only in the third decimal place because they were defined from slightly different reference measurements. A recipe that calls for 12 °Plato and a refractometer reading of 12 °Brix describe effectively the same wort. Use whichever your instrument and software prefer and convert to specific gravity when you need a precise figure for an alcohol calculation.
Why can’t I trust a refractometer after fermentation starts?
A refractometer measures how much light bends through the liquid, and alcohol bends light differently from sugar. Once fermentation produces ethanol, the raw Brix reading is skewed and reads higher than the true sugar content. The fix is a correction formula that accounts for the alcohol present, which is exactly what our Refractometer ABV Calculator applies. A hydrometer, which measures density directly, does not have this problem and is the better tool for tracking an active fermentation.
What is a gravity point?
A gravity point is the digits after the decimal in specific gravity: SG 1.048 is 48 points. Points are a convenient shorthand for recipe maths because they add and scale cleanly, and the quick rule Brix × 4 converts a Brix reading straight into points. When you feed a starting gravity into the Potential Alcohol Calculator, it is really working with the difference in points between your starting and finishing readings.
Frequently asked questions
Are Brix and Plato the same?
For brewing and winemaking they are close enough to treat as equal; they differ only in later decimal places.
Can I use this on fermenting wort or must?
Only for hydrometer-style readings. A refractometer reading taken after fermentation starts needs alcohol correction; use the Refractometer ABV Calculator.
What is the quick rule?
Multiply Brix by 4 to get gravity points: 12 °Brix is about 1.048.
What temperature does this assume?
20 °C (68 °F). Correct warm samples first with the Hydrometer Temperature Correction tool.
Note: Results are estimates for planning. Check measurements yourself, and never use any calculator to decide whether it is safe to drive.