SRM Beer Color Calculator

Beer colour is estimated with the Morey formula: SRM = 1.4922 × MCU^0.6859, where MCU is grain weight (lb) × grain colour (°L) ÷ batch volume (US gal), summed over all grains. EBC = SRM × 1.97.

By John Walker · Published November 2026

SRM Beer Color Calculator

Colour

10.1 SRM
Amber

EBC

19.9
SRM × 1.97

Malt colour units

16.3 MCU

How it is calculated

MCU = Σ (grain lb × °Lovibond) ÷ batch volume (US gal)

SRM = 1.4922 × MCU^0.6859

EBC = SRM × 1.97

Worked example

Inputs — Grain 1 weight (kg): 4.5; Grain 1 colour (°Lovibond): 2; Grain 2 weight (kg): 0.5; Grain 2 colour (°Lovibond): 60; Grain 3 weight (kg): 0; Grain 3 colour (°Lovibond): 0; Batch volume (litres): 20.

Results — Colour: 10.1 SRM; EBC: 19.9; Malt colour units: 16.3 MCU.

SRM and EBC: putting a number on beer colour

Colour is the first thing anyone notices about a beer, and brewers describe it with a number so recipes can be repeated and judged consistently. In the United States that number is SRM (Standard Reference Method); in Europe it is EBC (European Brewing Convention). The two measure the same thing — how much light the beer absorbs — and convert with a simple factor: EBC ≈ SRM × 1.97, near enough to double. A pale straw lager sits around 2–3 SRM; an amber ale around 10–17; a stout runs 30 and above, past the point where more colour stops making a visible difference.

You can estimate a beer’s colour from the recipe before you brew, which is what the calculator above does. It uses the Morey formula, the home-brewing standard: first work out the malt colour units (MCU) from each grain, then convert to SRM. The formula is SRM = 1.4922 × MCU^0.6859, where MCU is the sum, over every grain, of grain weight (in pounds) multiplied by its colour (in degrees Lovibond), divided by the batch volume (in US gallons). The sections below explain where the grain-colour numbers come from and why the estimate and the glass do not always agree.

Malt colour units and the Morey curve

MCU on its own would predict colour as a straight line — double the dark malt, double the colour — and that is roughly true for pale beers. But colour does not keep rising in a straight line; a beer only gets so dark before the eye stops registering the difference. The Morey formula bends the MCU figure with that ^0.6859 exponent to match what brewers actually see, which is why it is reliable up to about 50 SRM and then flattens. Below is a rough map of SRM to the colours brewers and judges use; the full mapping is published in the BJCP Color Reference.

SRMEBCColourExample style
2–34–6Pale strawLight lager, Pilsner
4–68–12GoldHelles, blonde ale
7–1014–20Deep gold to light amberPale ale
11–1722–33Amber to copperAmber ale, Vienna lager
18–2435–47BrownBrown ale, dunkel
25–3949–77Dark brownPorter
40+79+BlackStout, imperial stout

Where grain-colour numbers come from

Every malt has a published colour in degrees Lovibond (°L) on the maltster’s specification sheet — base malts are 1.5–3 °L, crystal malts 10–120 °L, roasted malts 300–600 °L. If your malt is listed in EBC instead, convert with the approximation °L ≈ (EBC + 1.2) ÷ 2.65. Extract brewers can treat liquid or dried malt extract as a grain, entering its listed colour. Because a tiny amount of a very dark malt dominates the result, accuracy on your roasted and crystal malts matters far more than on your base malt — a 2% addition of 500 °L roasted barley changes the colour more than a large swing in pale malt.

Sources & further reading: BJCP 2021 Color Reference; American Homebrewers Association

Why your beer and the calculator sometimes disagree

A colour estimate is a planning tool, not a guarantee. The Morey formula predicts from the grain bill, but several brew-day and post-brew factors nudge the real colour away from the number:

  • Boil length and intensity. A long or vigorous boil darkens wort through caramelisation and Maillard browning, which is why a 90-minute boil produces a deeper colour than a 60-minute one from the same grains.
  • Mash and wort pH. Higher pH extracts more colour and tannin from the husks; water chemistry quietly shifts the final shade.
  • Oxidation and age. Beer darkens as it ages, especially if it picked up oxygen after fermentation — a pale beer can turn noticeably amber over months.
  • Kettle caramelisation and decoction. Techniques that cook part of the wort, like a decoction mash, add colour the formula cannot see.

For these reasons, treat the SRM figure as a target to design around, and expect the finished beer to land a shade or two darker, particularly for big, long-boiled beers.

Designing a recipe to a colour target

Working backward from a target colour is one of the most practical uses of the calculator. If you want an amber ale at 13 SRM, you can trial crystal-malt additions until the estimate lands in range, then brew with confidence. Because the dark malts dominate, small adjustments to a crystal or a touch of roasted malt move the number precisely, while the base malt sets the foundation. Colour design goes hand in hand with the rest of the recipe: the Beer ABV Calculator handles strength from your gravities, the IBU Calculator balances bitterness, and the Brewhouse Efficiency Calculator tells you whether your grain bill is actually hitting its target gravity — which in turn affects how concentrated, and how dark, the wort becomes.

SRM, EBC and judging

If you enter competitions, colour is part of how a style is assessed, and judges work from the SRM ranges in the style guidelines. The BJCP deliberately cautions against being “overly pedantic” about matching a perceived colour to an exact SRM, because lighting and glassware change perception, but staying within a style’s stated range keeps your entry from being marked out of style on appearance alone. Convert to EBC with the ×1.97 factor if your reference or software works in European units, and remember that above roughly 30 SRM every beer looks much the same deep brown-to-black to the eye, even though the number keeps climbing.

Measuring colour for real

Laboratories measure SRM with a spectrophotometer at a specific wavelength, which is beyond most home set-ups. Home brewers instead compare a sample against printed colour cards or simply rely on the recipe estimate, which is accurate enough for design and judging. The calculator above gives you that estimate in both SRM and EBC from nothing more than your grain bill and batch size — enough to dial in the look of a beer before a single grain hits the mash.

SRM and beer colour: quick answers

How do I convert SRM to EBC?

Multiply SRM by about 1.97 — close enough to simply double it. So a 10 SRM amber ale is roughly 20 EBC. The two scales measure the same light absorption; SRM is the American convention and EBC the European one, and most brewing software lets you display either. To convert a malt listed in EBC to degrees Lovibond for the colour formula, use °L ≈ (EBC + 1.2) ÷ 2.65.

Why is my beer darker than the calculator predicted?

The Morey formula estimates colour from the grain bill, but a long or vigorous boil, a higher mash pH, kettle caramelisation and oxidation during ageing all add colour the formula cannot see. Big beers with long boils drift darkest. Treat the estimate as a design target and expect the finished beer to land a shade or two deeper, especially for strong or long-boiled styles.

Which malts control the colour?

The dark ones, by a wide margin. A small addition of a 300–600 °L roasted malt moves the colour far more than a large change in pale base malt, because colour contribution scales with each grain’s Lovibond rating. That is why accuracy on your crystal and roasted malts matters most, and why you can fine-tune a recipe’s shade with tiny adjustments to them. Colour design sits alongside strength and bitterness — balance all three with the Beer ABV Calculator and the IBU Calculator.

Frequently asked questions

How accurate is the Morey formula?

It is a good estimate up to about 50 SRM. Real colour also depends on boil length, pH and oxidation.

Where do I find grain colour?

On the maltster’s specification sheet, in °Lovibond or EBC. To convert a malt’s EBC to Lovibond, use °L ≈ (EBC + 1.2) ÷ 2.65.

What SRM is an amber ale?

Roughly 10 to 17 SRM.

Do hops or extract change colour?

Hops barely do. Malt extract does: enter it as a grain with its listed colour.

Note: Results are estimates for planning. Check measurements yourself, and never use any calculator to decide whether it is safe to drive.

Scroll to Top