Drinks per Bottle and Keg Calculator
Servings = container volume รท pour size. A 750 ml bottle holds 17 pours of 44 ml (1.5 oz), and a US half-barrel keg (58.67 L) holds 124 pints of 473 ml.
Drinks per Bottle and Keg Calculator
Servings
Usable volume
Left over
How it is calculated
Usable volume = container volume ร (1 โ waste %)
Servings = usable volume รท pour size, rounded down
Worked example
Inputs — Container: 750 ml bottle; Pour size (ml): 44; Waste or spillage (%): 0.
Results — Servings: 17; Usable volume: 0.75 L; Left over: 2 ml.
How many drinks are really in a bottle or keg?
Whether you are stocking a bar, planning a wedding or pricing a bottle, the question underneath almost every decision is the same: how many servings does this container actually hold? The answer is simple arithmetic — container volume divided by pour size — but the details matter, because the “right” pour size changes with the drink and because draught beer loses a surprising amount of volume to foam and line waste.
A standard 750 ml spirits bottle holds about 17 pours of 44 ml (1.5 US fl oz), the classic shot or cocktail measure. The same bottle gives roughly 25 pours at a 30 ml (1 oz) measure. A 750 ml wine bottle pours about five 150 ml (5 oz) glasses. These figures line up with the container examples published by the National Institute on Alcohol Abuse and Alcoholism (NIAAA), which notes that a 750 ml “fifth” of spirits contains about 17 standard drinks.
Bottle and keg sizes worth memorising
| Container | Volume | Servings |
|---|---|---|
| Standard bottle | 750 ml | 17 shots (44 ml) or 5 wine pours (150 ml) |
| Litre bottle | 1,000 ml | 22 shots (44 ml) |
| Handle | 1,750 ml | 39 shots (44 ml) |
| Cornelius (corny) keg | 18.9 L | ~53 US pints (355 ml) or 40 pints (473 ml) |
| Sixth barrel | 19.5 L | ~55 US pints (355 ml) |
| Quarter barrel | 29.3 L | ~82 US pints (355 ml) |
| Half barrel (full keg) | 58.7 L | ~165 pints (355 ml) or 124 pints (473 ml) |
The US half barrel is the keg most people picture: 15.5 US gallons, or 58.7 litres. At a true 16 oz (473 ml) pint it yields about 124 pints; at the smaller 12 oz (355 ml) serving common in the US it yields about 165 — before foam.
Why draught beer never gives you the full count
Kegs rarely deliver their theoretical servings. Foam, poorly balanced gas pressure, warm lines and the first and last pours all cost volume. A well-run bar loses perhaps 5% of a keg to waste; a badly balanced system can lose 20% or more. When you plan, allow for it — the calculator above has a waste field for exactly this. Getting the pressure right is the biggest lever: our Keg Carbonation Calculator works out the CO₂ pressure to hold a target carbonation at your serving temperature, which keeps pours tight instead of foamy.
Planning drinks for an event
For a party or wedding, servings-per-container is only half the job; you also need to know how many drinks the crowd will get through. A common planning rule is one drink per guest per hour, weighted toward the first hour. Multiply that out, split it across beer, wine and spirits, then convert each share back into bottles and kegs using the figures above. Two tools make this painless: the Party Drink Calculator for general gatherings and the Wedding Alcohol Calculator for receptions with a toast.
Using servings to cost and price
Servings per bottle is also the foundation of drink pricing. Divide a bottle’s cost by the number of pours it yields and you have your cost per serving; the Alcohol Cost Calculator does this directly, and the Cocktail Cost Calculator extends it to multi-ingredient drinks. Bar managers watch two numbers above all others: cost per drink and servings per container. Together they tell you whether a product earns its place on the back bar.
Choosing the right pour size
- Spirits: 44 ml (1.5 oz) is the standard single in the US; 30 ml (1 oz) or 25 ml are common elsewhere. A double is two singles.
- Wine: 150 ml (5 oz) is the standard restaurant pour, giving five glasses per bottle; a generous 175 ml pour gives about four.
- Beer: a US pint is 473 ml (16 oz); an imperial pint is 568 ml (20 oz). Mind which one your glassware actually holds.
Because beer and wine pours translate directly into alcohol intake, it is worth knowing how each serving maps onto a standard drink. The Standard Drink Calculator converts any volume and strength into standard drinks, and the Alcohol Unit Calculator does the same in UK units for hosts outside the US. Planning a bulk punch instead of individual pours? The Batch Cocktail Calculator scales a recipe to any number of servings and adds the right dilution.
Sources & further reading: NIAAA — What Is a Standard Drink?; TTB — Distilled Spirits
Keg types, line balance and getting a clean pour
Draught systems reward attention to detail. A keg that pours beautifully in the morning can turn to foam by evening if the temperature drifts or the gas pressure is wrong, and every foamy pour is lost product. Three things govern how many good pints you actually get out of a keg: temperature, pressure and line length.
Temperature is the master variable. Beer holds more CO₂ when it is cold, so a keg served at 3–4 °C (38–40 °F) stays settled and pours clean, while the same beer at 10 °C will foam no matter what you do with the regulator. Pressure must match the carbonation the beer was packaged at: too low and the beer goes flat over a few days, too high and it over-carbonates and foams. Our Keg Carbonation Calculator gives the equilibrium pressure for a target volume of CO₂ at any serving temperature, which is the number to set on your regulator. Line length and diameter provide resistance that lets you run enough pressure to keep the beer carbonated while still pouring at a sensible speed; a picnic tap on a short line is the classic cause of a foamy home keg.
Par levels: how bar managers decide what to stock
A par level is the amount of a product you want on hand at the start of each shift or week. It is built directly on servings-per-container. If a busy Friday goes through roughly one and a half half-barrels of your flagship lager, your par for that keg is two, so you never run dry mid-service but never over-order and tie up cash or risk stale beer. The same logic applies to spirits: count how many pours a week a bottle of house vodka sells, divide by the 22 pours in a litre, and you know how many bottles to keep on the shelf. Setting pars from real serving counts — rather than guesswork — is the difference between a tight, profitable bar and one that is forever 86ing popular items or pouring money down the drain in spoilage.
International sizes and why they trip people up
Container sizes are not universal. A European 50 litre keg is noticeably larger than a US half barrel (58.7 litres is actually bigger, but the common UK keg is 11 imperial gallons / 50 litres), and a UK pint (568 ml) is a fifth larger than a US pint (473 ml), so the “pints per keg” figure changes with geography. Wine bottles are a standard 750 ml almost everywhere, but magnums (1.5 L) hold two bottles and therefore about ten glasses, and spirit bottles range from 700 ml (common in Europe and Australia) to 750 ml (US) to the 1.75 L handle. When you plan an event with mixed stock, convert everything to millilitres first and let the calculator above do the division — it removes the unit confusion that causes hosts to run short.
Turning servings into a shopping list
Once you know servings per container and how many drinks your event needs, the shopping list writes itself: total drinks of each type, divided by servings per container, rounded up. Build in a 10–15% buffer for the unexpected — most retailers accept returns of unopened bottles, so slightly over-buying costs nothing but a return trip. For a structured plan, start from the Party Drink Calculator or the Wedding Alcohol Calculator, which output drink quantities you can feed straight back into this tool to get bottles and kegs.
Frequently asked questions
How many shots are in a 750 ml bottle?
Seventeen 44 ml (1.5 US fl oz) shots, with about 2 ml left over.
How many beers are in a half-barrel keg?
A US half barrel holds 58.67 litres: 165 servings of 355 ml (12 oz) or 124 US pints of 473 ml, before foam loss.
How much should I allow for waste?
Bars often allow 2โ5% for spirits and 5โ10% for draught beer to cover foam, spills and line cleaning.
How many glasses of wine are in a bottle?
Five 150 ml (5 oz) glasses in a standard 750 ml bottle.
Note: Results are estimates for planning. Check measurements yourself, and never use any calculator to decide whether it is safe to drive.