Potential Alcohol Calculator
Potential alcohol is the ABV a must will reach if its sugar ferments out. Convert Brix to specific gravity, then ABV = (OG − FG) × 131.25. Grape must at 22 °Brix fermented to 0.995 gives about 12.7% ABV.
Potential Alcohol Calculator
Potential ABV
Starting gravity
Quick rule
How it is calculated
OG = 1 + Brix ÷ (258.6 − (Brix ÷ 258.2) × 227.1)
Potential ABV = (OG − FG) × 131.25
Rule of thumb: ABV ≈ Brix × 0.55 to 0.60
Worked example
Inputs — Starting sugar (°Brix): 22; Expected final gravity: 0.995.
Results — Potential ABV: 12.7%; Starting gravity: 1.092; Quick rule: 12.1%.
Potential alcohol: how strong can this juice become?
Potential alcohol is the alcohol by volume a juice, must or wort would reach if all of its fermentable sugar were converted to alcohol. It is the single most important number a winemaker, cidermaker or mead maker takes before fermentation, because it tells you in advance whether your fruit will make a light table wine or a heavy dessert wine, and whether you need to add or dilute sugar to hit your target. Grape must at 22 °Brix, for example, carries a potential alcohol of roughly 12.7% — fermented to a typical dry final gravity, that is exactly where a standard table wine lands.
The calculation works in two steps. First, convert the starting sugar — usually measured in Brix with a refractometer — into a specific gravity. Then take the difference between that starting gravity and the final gravity you expect, and run it through the standard alcohol formula, ABV = (OG − FG) × 131.25. The calculator above does both from a Brix reading and an expected final gravity. If you measure in gravity rather than Brix, our Brix to SG Converter bridges the two scales.
The winemaker’s quick rule
Winemakers often skip the gravity step with a shortcut: potential ABV ≈ Brix × 0.55 to 0.60. So 22 °Brix gives roughly 12.1–13.2% potential alcohol. The factor varies because it bakes in an assumption about how dry the wine finishes and how efficiently the yeast works; 0.55 is conservative, 0.60 assumes a very dry finish. The gravity method the calculator uses is more precise because it lets you state your own expected final gravity rather than relying on a fixed factor, but the quick rule is perfect for a harvest-day decision in the vineyard.
| Starting Brix | Approx. starting SG | Potential ABV (dry) |
|---|---|---|
| 18 °Bx | 1.074 | ~10.3% |
| 20 °Bx | 1.083 | ~11.5% |
| 22 °Bx | 1.092 | ~12.7% |
| 24 °Bx | 1.101 | ~13.9% |
| 26 °Bx | 1.111 | ~15.1% |
Why the final gravity assumption matters
Potential alcohol is not a single fixed number for a given Brix — it depends on where fermentation stops. A wine fermented bone-dry to 0.992 extracts more alcohol from the same sugar than one left at 1.005 with residual sweetness. That is why the calculator asks for an expected final gravity: a dry red might finish near 0.995, an off-dry white near 1.000, and a sweet wine is deliberately stopped higher. If you want to raise the potential alcohol of an under-ripe or low-sugar must, you add sugar before fermentation — and the Chaptalization Calculator tells you exactly how much to add to reach a target gravity.
Sources & further reading: American Homebrewers Association; John Palmer, How to Brew
Using potential alcohol across wine, cider and mead
The same principle drives every sugar-based ferment, but the practical questions differ by drink. In winemaking, potential alcohol is a harvest decision: pick too early and the wine is thin and under-strength; pick too late and the sugar — and therefore the alcohol — climbs to a level that can stress the yeast and leave residual sweetness. Growers track Brix in the vineyard for weeks before harvest, aiming for the window that gives their target style. In cider, apple juice typically runs 10–14 °Brix, giving a naturally lighter 5–7% drink unless you chaptalise. In mead, you build the must to a chosen gravity with honey, so potential alcohol is something you design rather than inherit; our Mead Calculator works it out from honey weight and batch size.
Measuring sugar accurately
Your potential-alcohol estimate is only as good as your starting reading. A refractometer is the winemaker’s tool of choice because it needs only a drop of juice, but remember that once fermentation begins and alcohol is present, raw refractometer readings become unreliable — use the Refractometer ABV Calculator to correct them. A hydrometer reads gravity directly and is immune to that problem, but needs a larger, degassed, temperature-corrected sample. Whichever you use, measure before the yeast goes to work, because the instant fermentation starts your reading no longer reflects the original sugar.
Will the yeast actually get there?
Potential alcohol assumes the yeast ferments all the way. In practice, the strain’s alcohol tolerance can cut the result short: a yeast rated to 14% dropped into a must with 16% potential will stall and leave a sweet, under-attenuated wine. If you are aiming for a strong, dry result, choose a high-tolerance strain, pitch a healthy population and feed it — the Yeast Pitch Rate Calculator helps with the pitch. If you want residual sweetness, you can deliberately exceed the yeast’s tolerance, or ferment dry and back-sweeten after stabilising.
From potential to actual ABV
Once fermentation finishes, the actual alcohol is set by the real drop from original to final gravity, not the forecast. Take a final hydrometer reading and compare it with your starting gravity; the difference, through the same formula behind our Beer ABV Calculator, gives the true ABV. Comparing your actual result with the potential you calculated is one of the most useful habits in fermentation: a big gap usually points to a stalled or stuck ferment, a nutrient shortfall, or a yeast that hit its tolerance — all things you can diagnose and fix on the next batch.
Potential alcohol: practical questions
What Brix do I need for a 12% wine?
Roughly 21–22 °Brix, assuming the wine ferments to a dry finish. Lower Brix gives a lighter wine; higher Brix pushes toward 13–15% and, past the yeast’s tolerance, leaves residual sweetness. The exact figure depends on how dry you ferment, which is why the calculator above asks for an expected final gravity rather than relying on a single conversion factor.
Why do the quick rule and the gravity method disagree?
The Brix × 0.55–0.60 shortcut bakes in a fixed assumption about yield and final dryness, so it gives one answer for a given Brix. The gravity method lets you state your own expected final gravity, so it adapts to a bone-dry red, an off-dry white or a deliberately sweet wine. For a quick vineyard decision the shortcut is fine; for a recipe you are committing to, the gravity method is more precise.
How do I raise a must’s potential alcohol?
Add sugar before fermentation — a practice called chaptalisation in winemaking. Each addition raises the starting gravity and therefore the potential ABV. The Chaptalization Calculator works out exactly how much sugar to add to reach a target gravity, and the Brix to SG Converter keeps your readings consistent between scales. Just remember the yeast still has to reach that higher potential, so pair an ambitious target with a high-tolerance strain and a healthy pitch.
From the vine to the glass: a worked walkthrough
Suppose you pick grapes at 23 °Brix. Converting that to specific gravity gives a starting gravity near 1.097, and a dry red fermented to about 0.995 yields roughly 13.4% ABV — a full-bodied table wine. If you wanted a lighter, more food-friendly 11.5% wine from the same fruit, you would need to either harvest earlier at a lower Brix or dilute the must slightly, because the sugar sets the ceiling. If instead the fruit came in under-ripe at 19 °Brix, you could chaptalise up to your target with the help of the Chaptalization Calculator. This is the daily reality of winemaking: potential alcohol is the lever you pull at harvest and in the fermenter to land the style you want.
The habit worth building is to record three numbers for every batch — the starting Brix or gravity, the predicted potential alcohol, and the actual ABV from your final reading. Comparing the forecast with the result tells you how completely your yeast fermented and flags problems early: a large gap usually means a stuck or stalled fermentation, a nutrient shortfall, or a yeast that reached its alcohol tolerance. Over several batches those notes turn guesswork into a repeatable process, and the Beer ABV Calculator gives you the actual ABV from the gravities you log.
Frequently asked questions
What Brix do I need for 12% wine?
Roughly 21–22 °Brix, depending on how dry the wine finishes.
Why do the two results differ?
The Brix × 0.55 rule is a winery shortcut with a fixed yield. The gravity method reflects your expected final gravity.
How do I raise potential alcohol?
Add sugar before or during fermentation. The Chaptalization Calculator works out how much.
Does this work for cider and fruit wine?
Yes, for any juice where sugar is the main dissolved solid.
Note: Results are estimates for planning. Check measurements yourself, and never use any calculator to decide whether it is safe to drive.