Sulfite (Campden) Calculator
Work out exactly how much sulfite to add to protect your wine, cider or mead. Enter your batch size, the free SO2 you have now, and your target, and the calculator gives you the dose in potassium metabisulfite grams and in Campden tablets.
How the sulfite calculator works
Sulfite is the main preservative in winemaking. It is written as SO2, which stands for sulfur dioxide. It stops wine, cider and mead from going brown or turning to vinegar, and it holds back wild yeast and bacteria. This tool works out how much to add to reach the level you want.
Winemakers measure sulfite in parts per million, written ppm, which is the same as milligrams per litre. The dose depends on how much you have now and your target.
Potassium metabisulfite (g) = SO2 to add (ppm) × litres ÷ 570
The number 570 comes from the fact that potassium metabisulfite is only about 57% sulfur dioxide by weight. The calculator also converts the dose into Campden tablets, since one crushed tablet adds roughly 50 ppm of free SO2 to one gallon. If you prefer tablets, our guide to Campden tablets per gallon covers the timing and method.
What does sulfite actually do?
Sulfite does three jobs in your wine, and all three matter for a clean, stable result.
- It stops oxidation. Oxygen turns wine brown and gives it a flat, stale, sherry-like taste. Sulfite mops up the oxygen first.
- It controls microbes. It stuns wild yeast and spoilage bacteria, so your chosen yeast can work cleanly and the finished wine stays stable.
- It removes chlorine. A small dose takes chlorine and chloramine out of tap water, which otherwise cause a plastic or medicinal off-flavour.
Only part of the sulfite you add stays active. This active part is called free SO2, and it is the number that protects the wine. The rest binds to other compounds and is called bound SO2. The calculator works in free SO2, because that is what keeps your wine safe. Background on the chemistry is in Wikipedia’s potassium metabisulfite article.
How much free SO2 should you aim for?
The right target depends on the drink and the stage. These are common free SO2 levels home winemakers use.
| Stage or drink | Target free SO2 |
|---|---|
| Before fermentation (must) | 50 ppm |
| White wine, ageing and bottling | 30 to 40 ppm |
| Red wine, ageing and bottling | 25 to 35 ppm |
| Cider | 30 to 50 ppm |
| Mead | 30 to 50 ppm |
White wines usually need a little more than reds, because reds have natural compounds that help protect them. Enter your target above and the calculator gives the exact dose for your batch size.
Why does pH change how much you need?
This is the part most sulfite charts leave out, and it matters. Sulfite only works well in acidic liquid. pH is the measure of acidity, and a lower number means more acid. At a low pH, a small amount of free SO2 protects strongly. At a high pH, the same free SO2 does much less.
The part that truly protects is called molecular SO2, and winemakers aim for about 0.6 to 0.8 ppm of it. The calculator works this out from your pH, so you can see whether your target free SO2 is actually enough.
| Wine pH | Free SO2 needed for 0.8 ppm molecular |
|---|---|
| 3.0 | 13 ppm |
| 3.3 | 26 ppm |
| 3.5 | 40 ppm |
| 3.7 | 66 ppm |
| 3.8 | 82 ppm |
Notice how fast the number climbs. A wine at pH 3.8 needs six times the free SO2 of one at pH 3.0 for the same protection. If your pH is high, it is often better to lower it with a little acid first than to pour in large amounts of sulfite. You can check your must with the Brix to SG converter and plan the strength with the potential alcohol calculator.
Campden tablets or metabisulfite powder?
You can add sulfite as pre-measured tablets or as a loose powder. Both do the same job.
| Form | Best for | Notes |
|---|---|---|
| Campden tablets | Small batches, 1 to 5 gallons | Easy to count, crush before use, one tablet per gallon is the rule of thumb |
| Potassium metabisulfite powder | Larger or frequent batches | Cheaper per dose, needs an accurate scale, adds no sodium |
| Sodium metabisulfite powder | Sanitising and cleaning | Adds a little sodium, often used for equipment rather than the wine |
Tablets are the simplest choice when you make a gallon or two at a time. For bigger batches, a milligram scale and the powder give you exact doses and cost less. The calculator gives you both numbers, so use whichever you have on hand.
When do you add sulfite?
There are three main points in winemaking, and the dose is similar each time but the reason differs.
- Before fermentation. Add about 50 ppm to fresh juice or must, then wait 24 hours before adding yeast. This clears out wild yeast so your chosen strain takes over.
- After fermentation and at racking. Top the free SO2 back up as you move the wine off its sediment. Fermentation and time use sulfite up, so it needs refreshing.
- Before bottling. A final addition keeps the wine fresh and stable in the bottle for months or years.
Never add sulfite and then pitch yeast straight away, because it can stun your yeast too. Wait a day after the first dose. For the full timing guide, see our article on Campden tablets per gallon.
Sulfite, sorbate and back-sweetening
If you plan to sweeten your wine or cider after fermentation, sulfite has a special role. On its own it does not reliably stop yeast from eating the new sugar, so you pair it with another additive called potassium sorbate. Together they stop the yeast from starting up again and fizzing or bursting your bottles.
The safe order is: make sure fermentation is fully finished, add your sulfite dose and the sorbate, wait a day or two, then sweeten. Our back-sweetening calculator works out how much sugar or honey to add for your target sweetness. Do not skip the sulfite and sorbate step, or a sweetened wine can referment in the bottle.
Is sulfite safe, and how do you add it?
Sulfite is used in almost all commercial wine and in many foods such as dried fruit. At normal doses it is safe for most people, though a small number are sensitive to it, and some people with asthma can react. In the United States, wine with 10 ppm or more must say “contains sulfites” on the label, so tell anyone you share your wine with.
To add it, crush the tablets or weigh the powder, dissolve it in a little water or wine, then stir it gently through the whole batch. Work in a room with fresh air, because the gas can sting your nose. Keep it away from children. Once the sulfite has done its job, the rest of winemaking is about sugar and yeast, which the ABV calculator and mead calculator help you plan.
A worked example
Say you have a 5 gallon batch of red wine that currently reads 10 ppm free SO2, and you want to bring it up to 35 ppm before bottling. Enter those numbers and the calculator works it out.
- Free SO2 to add: 35 − 10 = 25 ppm.
- Volume in litres: 5 gallons is about 18.9 litres.
- Potassium metabisulfite: 25 × 18.9 ÷ 570 = about 0.83 grams.
- Campden tablets: 25 × 5 ÷ 50 = about 2.5 tablets.
So you would weigh out 0.83 grams of powder, or crush two and a half Campden tablets, dissolve it in a splash of wine, and stir it through the batch. Because the wine already had some free SO2, you add less than you would to a fresh batch. This is why measuring your current level, rather than always adding a full dose, keeps your total sulfite sensible and stops the wine from smelling sharp.
How to measure free SO2
Home winemakers who want to be exact use a titration kit, such as a Titrets kit or an aeration-oxidation setup, to measure the free SO2 already in the wine. If you do not measure, a safe habit is to assume the level has dropped since your last addition and to top it up gently at each racking. Keeping a simple log of every addition, with the date and amount, stops you from losing track and over-dosing. Over a few batches this record becomes the most useful tool you have, alongside the calculator above.
Frequently Asked Questions
How much potassium metabisulfite do I add per gallon?
To raise free SO2 by 50 ppm in 1 gallon (3.785 L), add about 0.33 grams of potassium metabisulfite, which is roughly one crushed Campden tablet.
How many Campden tablets for 5 gallons?
To add 50 ppm of free SO2 to 5 gallons, use about 5 crushed Campden tablets. The calculator adjusts this for your current and target levels.
What free SO2 level should wine have?
Most white wines are kept around 30 to 40 ppm free SO2 and reds around 25 to 35 ppm. Must before fermentation is often dosed to 50 ppm.
Why does pH matter for sulfite?
Sulfite only protects well in acidic wine. At a higher pH you need much more free SO2 to get the same protection, measured as molecular SO2.
Is potassium metabisulfite the same as Campden tablets?
Most Campden tablets are potassium or sodium metabisulfite pressed into a pill. One tablet is about 0.44 grams and adds roughly 50 ppm free SO2 per gallon.
Can I sweeten wine after adding sulfite?
Add sulfite together with potassium sorbate before sweetening, or the leftover yeast can eat the new sugar and referment in the bottle.