Bar Measurement Converter

Convert any bar or cocktail measurement into ounces, millilitres, teaspoons, tablespoons, jiggers and more. Type an amount, pick the unit you have, and see it in every other unit at once.

How the bar measurement converter works

Cocktail recipes come from all over the world, and they do not agree on units. An American recipe uses ounces. A European one uses millilitres or centilitres. An old bar manual might say jiggers, ponies or dashes. This converter turns any of them into all the others, so you can follow any recipe with the tools you have.

It works by turning your amount into millilitres first, then into every other unit. Millilitres make a good base because one millilitre is always one millilitre, everywhere.

UnitIn millilitres
1 fluid ounce (oz)29.57 ml
1 teaspoon (tsp)4.93 ml
1 tablespoon (tbsp)14.79 ml
1 jigger (1.5 oz)44.36 ml
1 pony (1 oz)29.57 ml
1 bar spoon5 ml
1 cup236.6 ml

Once you know how strong the finished drink is, the cocktail ABV calculator and the cocktail cost calculator take it from there.

What is a jigger?

A jigger is the small hourglass-shaped metal cup bartenders use to measure spirits. It is also a unit of measure. The standard jigger holds 1.5 fluid ounces, which is 44 millilitres, and that is the usual pour for a single shot of spirit in the United States.

Most jiggers have two cups, one on each end. The large side is usually 1.5 ounces and the small side is 0.75 or 1 ounce. The 1 ounce side is sometimes called a pony. Many jiggers also have lines inside marking half and quarter measures, so one tool can pour several amounts.

When a classic recipe lists a “jigger” of gin, it means 1.5 ounces. A “pony” means 1 ounce. Knowing this lets you read vintage cocktail books, which rarely use millilitres. For the strength of the finished drink, see the cocktail ABV calculator.

What does “parts” mean in a recipe?

Some recipes use parts instead of a fixed unit, such as “2 parts gin, 1 part vermouth”. A part is not a size. It is a ratio. You choose how big a part is, and keep it the same for every ingredient.

If one part is 1 ounce, then 2 parts gin and 1 part vermouth means 2 ounces of gin and 1 ounce of vermouth. If one part is 30 ml, it means 60 ml of gin and 30 ml of vermouth. The ratio stays the same, so the drink tastes the same whatever size you pick.

Parts are handy for scaling a drink up or down. To make a big batch, just make each part bigger. For large batches, the batch cocktail calculator does the scaling and the dilution for you.

How much is a dash, a splash or a barspoon?

Bars use several small, informal measures for bitters and flavourings. They are not exact, but these are the common amounts.

MeasureRough amount
DashAbout 0.9 ml (a quick shake of the bottle)
SplashAbout 5 ml (a small, free pour)
Bar spoon5 ml (one teaspoon)
DropAbout 0.05 ml
RinseA tiny amount to coat the glass, then tip out

A dash is the amount that comes out of a bitters bottle in one firm shake. Six to eight dashes make about a teaspoon. These small measures matter most for strong flavourings like bitters, where a little goes a long way.

Is a US ounce the same as a UK ounce?

Almost, but not quite, and it can trip you up. The two countries define the fluid ounce slightly differently.

UnitMillilitres
US fluid ounce29.57 ml
UK (imperial) fluid ounce28.41 ml
US cup236.6 ml
UK cup284 ml

For a single cocktail the difference is tiny and does not matter. For a large batch it adds up, so it is worth knowing which ounce a recipe means. This converter uses the US fluid ounce, which is the standard in cocktail recipes. The UK also measures spirits in its own way at the bar: a single is 25 ml and a double is 50 ml, which is why our guide to how many shots are in a 750ml bottle gives different answers for each country.

Using the converter to scale a recipe

The converter is most useful when a recipe uses units your tools do not have. Say a recipe calls for 60 ml of rum but your jigger is marked in ounces. Enter 60, pick millilitres, and you will see it is about 2 ounces, or 1.35 jiggers. Now you can pour it.

It also helps when you scale a single drink up to a pitcher. Convert each ingredient to millilitres, multiply by the number of servings, and you have your batch. Remember that a batch also needs water to replace the dilution you would get from shaking or stirring each drink with ice. The batch cocktail calculator adds that water for you, and the drinks per bottle calculator tells you how many drinks a bottle will pour.

Tips for measuring cocktails

  • Use a jigger, not your eye. Free pouring is fun but inconsistent, and cocktails are about balance.
  • Fill a jigger to the brim. A jigger is measured full, right to the top edge.
  • Learn your bar spoon. It doubles as a 5 ml (one teaspoon) measure for syrups and bitters.
  • Keep a cheat card. A small note of the common conversions by your bottles saves time.
  • Measure syrup too. Sweetness is as important as spirit. The simple syrup calculator helps you make it.

With accurate measures, the same recipe tastes the same every time, which is the whole point of a good cocktail. For more on measures, Wikipedia’s jigger article covers the history and the regional sizes.

Common cocktail conversions at a glance

Here are the measurements that come up most often behind the bar, so you can read any recipe quickly.

You haveOuncesMillilitres
1 bar spoon0.17 oz5 ml
1 teaspoon0.17 oz4.9 ml
1 tablespoon0.5 oz14.8 ml
1 pony1 oz29.6 ml
1 jigger / shot1.5 oz44.4 ml
1 snit3 oz88.7 ml
1 cup8 oz236.6 ml
1 pint16 oz473 ml

A snit is an old term for a 3 ounce side pour, usually served next to a beer. A pint and a cup are more common in kitchen measuring than in cocktails, but they appear in punch and large-batch recipes. Whenever a recipe uses a unit you do not have, type it into the converter and it gives you the amount in a unit you can actually pour.

Why accurate measuring makes a better drink

A cocktail is a balance of strong, sweet, sour and sometimes bitter. That balance only works if the amounts are right. A splash too much sweet, or a heavy hand with the spirit, and a bright, crisp drink turns cloying or harsh. This is why bartenders measure, even after years of practice. The eye drifts, especially late in a shift, but a jigger does not.

Measuring also lets you repeat a drink you love. If you free pour a great Margarita once, you may never make the same one again. If you measured it, you can make it exactly the same every time, and write it down to share. It also saves money, because you pour only what the recipe needs rather than a heavy, expensive overpour on every drink. For a bar, that adds up fast, which is why pour cost is tracked so closely with tools like the cocktail cost calculator.

Start with a jigger and a bar spoon, learn the handful of conversions above, and keep this page bookmarked for the rest. With accurate measures, any recipe from any country is yours to make, and every drink comes out the way the recipe intended.

Frequently Asked Questions

How many ml is a jigger?

A standard jigger is 1.5 fluid ounces, which is about 44 millilitres. The small side of most jiggers is 0.75 or 1 ounce.

How many ounces in a shot?

A US shot is usually 1.5 fluid ounces, the same as a standard jigger. In the UK a single is 25 ml and a double is 50 ml.

What does one part mean in a cocktail?

A part is a ratio, not a size. You pick how big a part is and keep it the same for every ingredient, so 2 parts to 1 part stays balanced at any size.

How much is a dash?

A dash is about 0.9 millilitres, the amount from one firm shake of a bitters bottle. Six to eight dashes make about a teaspoon.

Is a US ounce the same as a UK ounce?

No. A US fluid ounce is 29.57 ml and a UK imperial fluid ounce is 28.41 ml. The difference is tiny for one drink but adds up in a large batch.

How many teaspoons in a tablespoon?

There are 3 teaspoons in a tablespoon. One tablespoon is about 14.8 millilitres and one teaspoon is about 4.9 millilitres.

Scroll to Top