How Many Campden Tablets Per Gallon?
Use 1 Campden tablet per gallon of wine, cider or mead. Crush the tablet, dissolve it in a little water, and stir it in. This one-per-gallon dose works before fermentation, after fermentation and before bottling.
A Campden tablet is a small pill of sulfite. Home winemakers use it to kill wild yeast and bacteria and to stop the drink from turning brown. This guide explains the dose for every batch size, when to add it, and when you should not use it at all.
| Batch size | Campden tablets | Same dose as powder |
|---|---|---|
| 1 gallon (3.8 L) | 1 | A pinch (1/16 tsp) |
| 3 gallons (11 L) | 3 | Just under 1/4 tsp |
| 5 gallons (19 L) | 5 | 1/4 tsp, slightly heaped |
| 6 gallons (23 L) | 6 | 3/8 tsp |
| 10 gallons (38 L) | 10 | 5/8 tsp |
What is a Campden tablet?
A Campden tablet is a measured dose of potassium metabisulfite or sodium metabisulfite. Each tablet weighs about 0.44 grams. When it dissolves in an acidic liquid such as grape juice, it releases sulfur dioxide gas, written as SO2. Sulfur dioxide is the part that does the work.
The name comes from Chipping Campden, a town in England where the method was developed in the 1920s. You can read the background in Wikipedia’s Campden tablet article.
Sulfur dioxide does three jobs:
- It stuns wild yeast and bacteria that arrive on fruit, so the yeast you choose can take over.
- It blocks oxygen damage. Oxygen turns wine brown and gives it a flat, sherry-like taste.
- It removes chlorine and chloramine from tap water, which can cause a plastic or medicine taste.
| Fact | Value |
|---|---|
| Weight of one tablet | 0.44 g |
| Share that becomes SO2 | About 57% |
| SO2 added by 1 tablet in 1 US gallon | About 65 to 75 ppm |
| SO2 added by 1 tablet in 5 gallons | About 13 ppm |
The unit ppm means parts per million. It is the same as milligrams per litre.
When do you add Campden tablets?
There are three main times. The dose is the same each time, but the reason is different.
| Stage | Dose | Why | What to do next |
|---|---|---|---|
| Before fermentation | 1 per gallon | Kills wild yeast and bacteria on fresh fruit or juice | Cover loosely and wait 24 hours before adding yeast |
| At racking | 1 per gallon, or half | Protects against oxygen while the wine is moved | Refit the airlock |
| Before bottling | 1 per gallon | Keeps the wine fresh in the bottle | Wait 24 to 48 hours, then bottle |
The 24 hour wait before adding yeast is important. The sulfur dioxide needs time to work and then fade. If you add yeast too soon, the sulfite can stun it as well, and the fermentation may start slowly or not at all. Do not seal the container during this wait. Cover it with a clean cloth so the gas can escape.
Racking means moving the wine off the layer of dead yeast at the bottom into a clean container. Many winemakers add half a dose at each racking instead of a full dose, so the total does not build up too high.
How do you use a Campden tablet the right way?
- Count one tablet for each gallon.
- Crush the tablets into a fine powder between two spoons.
- Dissolve the powder in a few spoonfuls of warm water or juice.
- Pour it into the batch and stir gently for a minute.
- Wait the right time for the stage you are at.
Never drop whole tablets into the batch. They dissolve very slowly and the sulfite does not spread evenly.
Does pH change how many tablets you need?
Yes. Sulfite works best in acidic liquids. pH is a measure of acidity, and a lower number means more acid. At a low pH, a small dose protects well. At a high pH, you need more to get the same effect.
Cider makers often use this guide for fresh apple juice:
| Juice pH | Tablets per gallon |
|---|---|
| Below 3.0 | None needed |
| 3.0 to 3.3 | 1 |
| 3.3 to 3.5 | 2 |
| 3.5 to 3.8 | 3 |
| Above 3.8 | Add acid first to lower the pH |
If you do not have a pH meter or test strips, one tablet per gallon is the safe standard dose for most wines, ciders and meads.
How many Campden tablets for wine, cider, mead and beer?
| Drink | Dose | Notes |
|---|---|---|
| Fruit and grape wine | 1 per gallon | Before fermentation and before bottling |
| Wine kits | Follow the kit | Kit juice is already treated, so skip the first dose |
| Cider from fresh apples | 1 per gallon | Adjust by pH if you can measure it |
| Cider from shop juice | None at the start | Pasteurised juice has no wild yeast |
| Mead | 1 per gallon at the end | Honey rarely needs a dose at the start |
| Beer brewing water | 1 per 20 gallons | Only to remove chlorine and chloramine |
For brewing water, the dose is tiny. Half a tablet treats 10 gallons of tap water in a couple of minutes. If you are planning a mead, the guide on how much honey for 1 gallon of mead covers the recipe side, and the mead calculator sets the honey and water amounts.
Do Campden tablets stop fermentation?
No, not on their own. This is a very common myth. A Campden tablet slows yeast down, but a strong, active fermentation will usually carry on. Wine yeast is bred to tolerate sulfite.
To keep a finished wine from fermenting again after you sweeten it, you need two things together:
- Campden tablet: 1 per gallon.
- Potassium sorbate: half a teaspoon per gallon.
Sorbate stops yeast from multiplying, and sulfite protects the wine. Add both only after the fermentation has fully finished and the wine is clear. You can confirm it has finished by taking the same gravity reading several days apart. The ABV calculator then tells you the final strength from your start and end readings.
The opposite also matters. If you want a fizzy drink that carbonates in the bottle, do not add Campden and sorbate before bottling, because the yeast must stay alive to make the bubbles. The priming sugar calculator handles that step.
What are the common mistakes?
- Adding yeast too early. Wait the full 24 hours after the first dose.
- Adding a full dose at every step. Sulfite adds up. Too much gives a sharp smell like a struck match.
- Using old tablets. Tablets lose strength after a year or two, faster if the tub is left open. Store them dry and sealed.
- Dosing by batch name, not volume. A 6 gallon carboy needs 6 tablets, not 5.
- Using them as a sanitiser the wrong way. To sanitise equipment you need a much stronger mix, about 16 tablets per gallon of water, with a little citric acid.
Are Campden tablets safe?
For most people, yes, at normal doses. Sulfites are used in dried fruit, fruit juice and almost all commercial wine. A small number of people are sensitive to sulfites, and some people with asthma can react to them. In the United States, wine with 10 ppm or more of sulfites must say “contains sulfites” on the label. If you share your wine, tell people that you used them.
Work in a room with fresh air when you crush and dissolve tablets, because the gas can irritate your nose and throat. Keep the tub away from children.
Once the sulfite has done its job, the rest of winemaking is about sugar and alcohol. The potential alcohol calculator predicts how strong your wine will be from its starting sugar, and the Brix to SG converter helps you read your juice.
What does a full dosing plan look like?
Here is a worked example for a 5 gallon batch of blackberry wine made from fresh fruit.
| Day | Step | Tablets |
|---|---|---|
| Day 1 | Crush fruit, add water and sugar, add sulfite | 5 |
| Day 2 | Add yeast after 24 hours | 0 |
| Week 4 | First racking | 2 or 3 (half dose) |
| Month 3 | Second racking | 0 to 2 |
| Bottling day | Final protection | 5 |
The total over the whole process stays moderate, and each dose has a clear job. Write every addition in your notes so you never double up by accident.
Frequently Asked Questions
How many Campden tablets do I need for 5 gallons of wine?
Use 5 Campden tablets for 5 gallons of wine. The standard dose is 1 crushed tablet per gallon.
How long after Campden tablets can I add yeast?
Wait 24 hours after adding Campden tablets before you add yeast. Leave the container loosely covered during that time.
Can I use too many Campden tablets?
Yes. Too much sulfite can stop your yeast from starting and leaves a sharp smell like a burnt match. Stick to 1 tablet per gallon per stage.
Do Campden tablets kill yeast?
They stun or kill most wild yeast and bacteria, but cultured wine yeast tolerates normal doses. They do not reliably stop an active fermentation.
Is potassium metabisulfite the same as Campden tablets?
Yes. Most Campden tablets are potassium metabisulfite pressed into a pill. A quarter teaspoon of the powder equals about 5 tablets.
Do Campden tablets expire?
They slowly lose strength. Replace them after about two years, or sooner if the container has been left open or damp.

