How to Tell When Fermentation Is Done (Wine, Beer, Cider and Mead)
Fermentation is done when the specific gravity stays the same for two to three days in a row on your hydrometer. That stable reading, not the airlock, is the only reliable way to tell when fermentation is finished. A quiet airlock can fool you, so the hydrometer is the tool that gives a real answer for wine, beer, cider, and mead.
Knowing when fermentation is truly done matters, because bottling too early can leave live yeast and sugar that build pressure and even burst bottles. This guide shows you the stable-gravity test, what final reading to expect, and the other signs that back it up.
The stable gravity rule: the only reliable test
Specific gravity measures how much sugar is left in your liquid. Water reads 1.000. As yeast eat the sugar and make alcohol, the gravity falls. When the yeast run out of food, the gravity stops dropping and holds steady. That is your signal.
The test is simple. Take a hydrometer reading, wait two to three days, and take another. If the number has not changed, fermentation is done. If it is still falling, the yeast are still working, so wait and test again.
Always correct your reading for temperature, since a warm sample reads low. The hydrometer temperature correction tool adjusts for this, and if you use a refractometer instead, the Brix to specific gravity converter turns that scale into gravity.
What final gravity should you expect?
The finished, or final, gravity depends on the drink and the yeast. Most wines, ciders, and meads ferment nearly dry, ending at or below 1.000. Beers keep more body and finish higher. This chart gives typical finished readings.
| Drink | Typical final gravity | Notes |
|---|---|---|
| Dry wine | 0.990 to 1.000 | Ferments nearly dry |
| Cider (dry) | 0.995 to 1.005 | Often fully dry |
| Mead (dry) | 0.990 to 1.000 | Can take weeks to finish |
| Beer | 1.008 to 1.015 | Malt leaves body behind |
| Sweet or dessert styles | 1.010 and up | Stopped or back-sweetened |
If you know your starting gravity, you can also confirm the drink is on track by checking the alcohol it should reach. The ABV calculator turns your start and end readings into a strength, and the potential alcohol calculator shows the strength a given starting gravity can reach.
Why airlock bubbles do not tell you fermentation is done
Most beginners watch the airlock and assume that when the bubbles stop, fermentation is over. This is one of the most common mistakes in home brewing, and it leads to early bottling and burst bottles.
The problem is that an airlock only shows gas moving, not sugar being eaten. Bubbling can stop while fermentation is still going, if gas is escaping somewhere else like a loose lid. It can also keep bubbling after fermentation is done, as dissolved carbon dioxide slowly leaves the liquid, a process called degassing. Temperature and pressure changes push gas out too. Only the hydrometer measures what actually matters, which is the sugar.
Other signs fermentation is finished
The stable gravity reading is the proof, but these signs support it and are useful between readings.
- The liquid clears. As yeast finish, they fall to the bottom and the wine or cider turns from cloudy to clear.
- A sediment layer forms. A pad of spent yeast, called the lees, settles on the base.
- Activity calms. The vigorous foaming and churning of the early days settles to stillness.
- The taste changes. A sample tastes less sweet and more alcoholic than the raw must or wort.
Treat these as hints, not proof. A wine can look clear and still have a few points of sugar left, which is exactly why the two-reading gravity test is the final word.
How long does fermentation take?
Timing varies a lot with yeast, temperature, and sugar level. Use these ranges as a guide, but always confirm with a reading rather than the calendar.
| Drink | Primary fermentation |
|---|---|
| Beer | 1 to 2 weeks |
| Cider | 2 to 4 weeks |
| Wine | 2 to 3 weeks (then aging) |
| Mead | 3 to 6 weeks or longer |
For beer, you can also judge how complete fermentation is by comparing your start and end gravity as attenuation, the share of sugar the yeast used. The attenuation calculator shows whether your yeast finished as expected for its strain.
Is it safe to bottle yet?
Bottle only after you have two matching gravity readings two to three days apart. This is the safety check that prevents the classic home brewing accident: bottle bombs.
If you bottle while sugar is still fermenting, the yeast keep making carbon dioxide inside a sealed bottle. The pressure builds with nowhere to go, and a bottle can gush or shatter. Waiting for stable gravity, and for beer adding only the measured priming sugar, keeps this from happening. When you do want sweetness, stabilise first with sulfite and potassium sorbate so the yeast cannot restart.
What if fermentation seems stuck?
Sometimes gravity stalls well above the expected finish, often because the yeast got too cold, ran out of nutrient, or faced very high sugar. Before assuming it is done, check that the reading matches the expected final gravity for your drink. If it is far too high and stable, the fermentation may be stuck rather than finished.
Gentle warmth, a careful stir, or a dose of yeast nutrient can often restart a stuck batch. For honey wines, which are the most prone to sluggish, long fermentations, planning the sugar and nutrient from the start with the mead calculator helps avoid the problem. For more background, the fermentation in winemaking article on Wikipedia is a useful read.
Primary vs secondary fermentation: which are you checking?
New brewers often get confused because there are two stages, and the word done can mean different things. Knowing which stage you are in helps you read your hydrometer correctly.
| Stage | What happens | How to tell it is done |
|---|---|---|
| Primary fermentation | Fast, vigorous sugar-to-alcohol conversion | Gravity falls most of the way and begins to level off |
| Secondary fermentation | Slow finish and clearing | Gravity reaches and holds at the final reading |
| Malolactic (some wines) | Bacteria soften harsh acid | A separate process, not measured by a hydrometer |
Primary is the loud, bubbly phase in the first days. Most of the gravity drop happens here. Secondary is the calm phase where the last bit of sugar is used and the wine clears. The stable-gravity test applies to the whole run: you are done when the number stops moving and matches the expected final gravity for your drink.
One extra note for red wine makers: many reds go through malolactic fermentation after the main ferment, where bacteria convert sharp malic acid into softer lactic acid. This does not show up as a big gravity change, so it is tracked differently and does not affect the stable-gravity test for your main fermentation.
Quick checklist before you move on
Before you rack, bottle, or sweeten, run through this short checklist. It brings together every signal in one place so you can be confident fermentation is truly finished.
- Two matching readings. Specific gravity is the same two to three days apart.
- Reading matches the style. The final gravity sits in the expected range for your drink, not stuck high.
- Temperature corrected. You adjusted the reading for the sample temperature.
- The liquid has cleared. Yeast have dropped and a sediment layer has formed.
- Activity has calmed. No more vigorous foaming or churning.
If every box is ticked, you are ready for the next step with confidence. If the gravity is still moving, simply give the yeast more time and test again. Patience here is what separates a clean, stable batch from a fizzing, over-carbonated surprise later. When the numbers hold steady, your fermentation is done.
Frequently Asked Questions
How do I know when fermentation is done?
Take a hydrometer reading, wait two to three days, and read again. If the specific gravity has not changed, fermentation is done. A stable reading is the only reliable test.
Can I tell fermentation is done from the airlock?
No. An airlock only shows gas moving, not sugar being eaten. It can stop while fermentation continues or keep bubbling after it ends as carbon dioxide degasses. Use a hydrometer.
What final gravity means fermentation is finished?
Most dry wines, ciders, and meads finish at or below 1.000. Beer usually finishes around 1.008 to 1.015 because malt leaves body. The key is that the reading stays stable.
How long does fermentation take?
Roughly 1 to 2 weeks for beer, 2 to 4 weeks for cider, 2 to 3 weeks for wine, and 3 to 6 weeks or longer for mead. Always confirm with a stable gravity reading.
Is it safe to bottle when the airlock stops bubbling?
Not on its own. Bottle only after two matching gravity readings two to three days apart. Bottling with live fermentation can cause dangerous bottle bombs.
Why is my gravity not dropping anymore?
Either fermentation is done, or it is stuck. Compare your reading to the expected final gravity. If it is far too high and stable, warmth, a stir, or yeast nutrient may restart it.

