Priming Sugar for Cider: How Much Do You Need?
Use about 1 ounce of priming sugar per gallon of cider. That is 24 grams of table sugar or 28 grams of corn sugar. For a 5 gallon batch, use 4.2 ounces (119 g) of table sugar or 4.9 ounces (138 g) of corn sugar. This gives a lively, sparkling cider with about 2.5 volumes of carbon dioxide.
Priming sugar is a small, measured dose of sugar that you add to cider just before you bottle it. The yeast still in the cider eats the sugar inside the sealed bottle and makes carbon dioxide gas. The gas has nowhere to go, so it dissolves into the cider and makes it fizzy. This is called bottle conditioning.
| Fizz level | Volumes of CO2 | Table sugar per gallon | Corn sugar per gallon |
|---|---|---|---|
| Lightly sparkling (petillant) | 1.5 | 9 g | 11 g |
| Medium, like English cider | 2.0 | 17 g | 19 g |
| Sparkling, like most bottled cider | 2.5 | 24 g | 28 g |
| Very fizzy, champagne style | 3.0 | 31 g | 36 g |
These amounts assume the cider is at about 68°F (20°C) when you bottle it.
What does “volumes of CO2” mean?
Brewers measure fizz in volumes of carbon dioxide. One volume means that one litre of cider holds one litre of gas dissolved in it. A higher number means more bubbles and more pressure in the bottle.
| Drink | Typical volumes of CO2 |
|---|---|
| Still cider | Under 1.0 |
| English cask ale | 1.5 |
| Most beer and bottled cider | 2.2 to 2.7 |
| Soda and cola | 3.5 |
| Champagne | 5 to 6 |
Cider already holds a little gas left over from fermentation, even when it looks flat. At 68°F that is about 0.85 volumes. Priming sugar only has to add the difference. So to reach 2.5 volumes, the sugar needs to make 1.65 volumes.
How much priming sugar for 1, 3 and 5 gallons?
| Batch | Light (1.5) | Medium (2.0) | Sparkling (2.5) | Very fizzy (3.0) |
|---|---|---|---|---|
| 1 gallon, table sugar | 9 g | 17 g | 24 g | 31 g |
| 3 gallons, table sugar | 28 g | 50 g | 71 g | 93 g |
| 5 gallons, table sugar | 47 g | 83 g | 119 g | 155 g |
| 5 gallons, corn sugar | 54 g | 96 g | 138 g | 180 g |
If you do not have a scale, 24 grams of table sugar is about 2 level tablespoons. A cheap kitchen scale is much more reliable, because a small error matters when the sugar is sealed in glass. For any batch size, temperature or sugar type, the priming sugar calculator gives the exact amount.
How is the amount worked out?
The formula is short:
Sugar (g) = (target volumes − volumes already in the cider) × litres × 3.8
The number 3.8 is the grams of table sugar needed to add one volume of gas to one litre. For corn sugar, use 4.4 instead, because corn sugar holds a little water and makes less gas per gram.
Here is the sum for 1 gallon, which is 3.785 litres, at a target of 2.5 volumes: (2.5 − 0.85) × 3.785 × 3.8 = 24 grams of table sugar.
Temperature changes the starting gas. Cold cider holds more gas than warm cider, so it needs slightly less sugar.
| Cider temperature at bottling | Gas already in the cider |
|---|---|
| 50°F (10°C) | 1.2 volumes |
| 60°F (16°C) | 1.0 volumes |
| 68°F (20°C) | 0.85 volumes |
| 75°F (24°C) | 0.75 volumes |
Use the warmest temperature the cider reached after fermentation ended, not the temperature on bottling day.
Which sugar is best for priming cider?
| Sugar | Amount for 1 gallon at 2.5 volumes | Notes |
|---|---|---|
| Table sugar (sucrose) | 24 g | Cheap, clean, works perfectly |
| Corn sugar (dextrose) | 28 g | The classic brewing choice |
| Honey | 30 g | Adds a faint flavour, slower to finish |
| Brown sugar | 25 g | Slight caramel note |
| Apple juice | 220 ml (about 7.5 fl oz) | Keeps it all apple, sugar level varies by brand |
Table sugar and corn sugar taste the same in the finished cider, so use whichever you have. Apple juice or frozen apple concentrate is a nice touch, but check the sugar on the label. Most apple juice has about 110 grams of sugar per litre.
Carbonation drops are another option. They are small sugar tablets, and the usual dose is one drop per 12 ounce bottle. They are easy but give you less control over the fizz level.
How much sugar per bottle?
It is better to mix the sugar into the whole batch, but you can dose each bottle if you are only filling a few.
| Bottle size | Table sugar for 2.5 volumes |
|---|---|
| 12 oz (355 ml) | 2.2 g (a level half teaspoon) |
| 16 oz / 500 ml | 3.1 g |
| 22 oz (650 ml) | 4.1 g |
| 750 ml | 4.7 g (a heaped teaspoon) |
How do you prime and bottle cider step by step?
- Check that fermentation has finished. Take a gravity reading, wait three days and take another. If both match and the number is 1.000 or lower, the cider is done.
- Weigh the sugar for your batch size and fizz level.
- Dissolve it in a cup of boiling water and let it cool for a few minutes.
- Pour the syrup into a clean bottling bucket and siphon the cider on top. The swirl mixes it. Stir gently once, without splashing.
- Fill the bottles, leaving about an inch of space at the top, and cap them.
- Keep the bottles at room temperature, around 68 to 72°F, for two to three weeks.
- Chill one bottle and open it. If the fizz is right, move the rest somewhere cool.
Take gravity readings at the temperature printed on your hydrometer, or fix them with the hydrometer temperature correction tool. Once you have your start and end readings, the ABV calculator tells you how strong the cider is.
How do you avoid bottle bombs?
A bottle bomb is a bottle that bursts because the pressure inside got too high. It is rare, but it is dangerous, and it is almost always caused by one of three mistakes.
- Bottling too early. If the cider still has apple sugar left, the yeast eats that and the priming sugar. Always confirm a steady final gravity first.
- Adding too much sugar. Weigh it. Do not guess.
- Using weak bottles. Use proper beer bottles, swing-top bottles or champagne bottles. Do not use wine bottles with corks, screw-cap wine bottles or decorative glass.
Standard beer bottles are fine up to about 3 volumes. For anything fizzier, use champagne bottles, which are built for it. Store conditioning bottles in a closed box or cupboard for the first few weeks.
Can you make a cider that is both sweet and fizzy?
This is the tricky part of cider. Yeast eats any normal sugar you add, so extra sugar makes more gas, not more sweetness. There are three safe ways around it:
- Use a sweetener yeast cannot eat, such as erythritol, xylitol or stevia, along with the normal priming sugar.
- Pasteurise the bottles in hot water once the fizz is right, which stops the yeast. This needs care and a thermometer.
- Keg it. Stabilise and sweeten the cider, then add gas from a cylinder. The keg carbonation calculator gives the pressure to set.
Do not add Campden tablets or potassium sorbate before bottle conditioning. They stop the yeast, and the cider will stay flat. Our guide to Campden tablets per gallon explains when they are useful instead. For background on cider styles, see Wikipedia’s cider article.
What if the cider has aged for a long time?
Cider that has sat for many months can be very clear, with most of the yeast settled out. There may not be enough live yeast left to carbonate the bottles. If your cider has aged for more than three or four months, add a little fresh yeast at bottling. A quarter of a packet of champagne or cider yeast, stirred into the priming syrup, is plenty for 5 gallons. It will not change the taste, and it makes the result much more reliable.
Write down the sugar amount, the temperature and the date on every batch. If the fizz is not quite right, your notes tell you what to change next time.
Frequently Asked Questions
How much priming sugar do I need for 1 gallon of cider?
Use about 24 grams of table sugar or 28 grams of corn sugar for 1 gallon of sparkling cider. That is roughly 1 ounce.
How much priming sugar for 5 gallons of cider?
Use about 119 grams (4.2 oz) of table sugar or 138 grams (4.9 oz) of corn sugar for 5 gallons at 2.5 volumes of CO2.
How long does cider take to carbonate in the bottle?
Cider usually carbonates in two to three weeks at room temperature. Cooler rooms take longer.
Can I use regular sugar to carbonate cider?
Yes. Regular white table sugar works very well and leaves no taste. Use slightly less of it than corn sugar.
Why is my bottled cider flat?
The most common reasons are too little sugar, a cold room, bottling after adding sorbate or sulfite, or yeast that is too old and tired after long ageing.
How much sugar do I add per bottle of cider?
Add about 2.2 grams, or a level half teaspoon, of table sugar to each 12 ounce bottle for a sparkling cider.

