How Much Priming Sugar Per Gallon of Beer?

Use about 1 ounce (28 grams) of corn sugar per gallon of beer. If you use white table sugar, use slightly less: 24 grams per gallon. For a standard 5 gallon batch, that is 4.9 ounces of corn sugar or 4.2 ounces of table sugar. This gives a normal fizz of about 2.5 volumes of carbon dioxide, which suits most ales and lagers.

Priming sugar is a small dose of sugar that you add to finished beer just before bottling. The yeast left in the beer eats it inside the sealed bottle and makes carbon dioxide gas. The gas cannot escape, so it dissolves into the beer and makes it fizzy. Brewers call this bottle conditioning. This guide gives the amounts by style, batch size and bottle, and shows how to avoid flat beer and burst bottles.

Fizz levelVolumes of CO2Table sugar per gallonCorn sugar per gallon
Low (British cask style)1.59 g11 g
Medium-low (porter, stout)2.017 g19 g
Standard (most ales and lagers)2.524 g28 g
High (Belgian ales)3.031 g36 g
Very high (German wheat beer)3.538 g44 g

The chart assumes the beer is at about 68°F (20°C) at bottling.

How much carbonation does each beer style need?

Different beers are meant to have different amounts of fizz. A British bitter is soft and gentle. A German hefeweizen is lively and foamy. Matching the fizz to the style makes the beer taste the way it should.

Beer styleVolumes of CO2Corn sugar for 5 gallons
British bitter, mild, ESB1.5 to 2.01.9 to 3.4 oz
Porter and stout1.8 to 2.32.8 to 4.3 oz
American pale ale and IPA2.2 to 2.74.0 to 5.5 oz
Lager and pilsner2.4 to 2.74.6 to 5.5 oz
Belgian ales and saison2.5 to 3.54.9 to 7.8 oz
German wheat beer3.3 to 4.57.2 to 10.8 oz

Anything above 3 volumes needs thick bottles made for high pressure, such as Belgian or champagne-style bottles. Standard beer bottles are safe up to about 3 volumes. The BJCP style guidelines describe how each style should feel in the mouth.

How much priming sugar for 1, 2.5, 5 and 6 gallons?

These amounts are for the standard 2.5 volumes at 68°F.

Batch sizeTable sugarCorn sugar
1 gallon24 g (0.8 oz)28 g (1.0 oz)
2.5 gallons60 g (2.1 oz)69 g (2.4 oz)
5 gallons119 g (4.2 oz)138 g (4.9 oz)
6 gallons143 g (5.0 oz)165 g (5.8 oz)

Measure the beer you are actually bottling, not the size written on the recipe. A “5 gallon” batch often ends up as 4.5 gallons after you leave the sediment behind. Priming 4.5 gallons with a 5 gallon dose makes the beer fizzier than planned. For exact numbers at any volume and temperature, use the priming sugar calculator.

How is priming sugar calculated?

Brewers measure fizz in volumes of CO2. One volume means one litre of gas dissolved in one litre of beer. The formula is:

Sugar (g) = (target volumes − volumes already in the beer) × litres × 3.8

The number 3.8 is the grams of table sugar that add one volume to one litre. For corn sugar, use 4.4.

Beer already holds some gas from fermentation, even when it looks flat. How much depends on temperature, because cold liquid holds more gas.

Beer temperatureCO2 already in the beer
50°F (10°C)1.2 volumes
60°F (16°C)1.0 volumes
68°F (20°C)0.85 volumes
75°F (24°C)0.75 volumes

Here is the sum for 1 gallon (3.785 litres) at 68°F with a target of 2.5 volumes: (2.5 − 0.85) × 3.785 × 3.8 = 24 grams of table sugar. Use the warmest temperature the beer reached after fermentation finished. If a lager fermented at 50°F and then warmed to 65°F for a few days, use 65°F.

Corn sugar, table sugar or malt extract?

Priming sugarFor 5 gallons at 2.5 volumesNotes
Corn sugar (dextrose)138 g (4.9 oz)The classic choice, included in most kits
Table sugar (sucrose)119 g (4.2 oz)Cheap and works just as well
Dry malt extract (DME)About 180 g (6.3 oz)All-malt option, slower, less exact
HoneyAbout 150 g (5.3 oz)Sugar content varies, faint flavour
Carbonation drops1 per 12 oz bottleEasiest, fixed fizz level

Corn sugar and table sugar taste the same in the finished beer. The old idea that table sugar gives a “cidery” flavour does not apply to the tiny amount used for priming. Corn sugar needs a bigger dose because it holds some water, so each gram makes a little less gas.

Weigh the sugar if you can. Cup measures are rough, because sugar packs differently each time. As a guide, three quarters of a cup of corn sugar is about 4 ounces.

How much sugar per bottle?

Mixing sugar into the whole batch is more even, but dosing single bottles works for small batches.

Bottle sizeTable sugar for 2.5 volumes
330 ml2.1 g
12 oz (355 ml)2.2 g (a level half teaspoon)
500 ml3.1 g
22 oz bomber (650 ml)4.1 g
750 ml4.7 g (a heaped teaspoon)

How do you prime and bottle beer step by step?

  1. Confirm the beer is finished. Take a gravity reading, wait two or three days, and take another. If they match, fermentation is done.
  2. Measure the volume you will bottle.
  3. Weigh the sugar for that volume and your target fizz.
  4. Boil the sugar in one or two cups of water for a few minutes. This dissolves and sanitises it.
  5. Pour the syrup into a sanitised bottling bucket, then siphon the beer on top so it mixes as it swirls.
  6. Stir once, gently. Do not splash. Oxygen makes beer taste stale.
  7. Fill and cap the bottles, leaving about an inch of space.
  8. Store at 68 to 72°F for two to three weeks.
  9. Chill one bottle for a day and open it. If the fizz is right, the batch is ready.

Hydrometers read correctly at one temperature only, so fix warm samples with the hydrometer temperature correction tool. Your start and end readings also give the strength through the ABV calculator and show how completely the yeast worked through the attenuation calculator.

What causes flat beer, gushers and bottle bombs?

ProblemLikely causeFix
Flat beer after 3 weeksRoom too cold, or too little sugarMove bottles somewhere warmer and wait two more weeks
Some bottles flat, some fizzySugar not mixed evenlySiphon onto the syrup and stir gently next time
Foam gushes out on openingToo much sugar, bottled too early, or infectionWeigh sugar, confirm final gravity, sanitise well
Bottles burstFermentation was not finishedNever bottle until gravity is steady
Strong beer will not carbonateYeast worn out by high alcoholAdd a little fresh yeast at bottling

A bottle bomb is dangerous. If you suspect a batch is over-carbonated, chill all the bottles to slow the yeast, wear eye protection, and open them carefully over a sink. Keeping conditioning bottles in a closed box is a sensible habit.

John Palmer’s free book How to Brew has a full chapter on priming and bottling if you want to read further.

Do you need priming sugar if you keg?

No. Most brewers who keg add carbon dioxide from a gas cylinder instead. It is faster, and you can change the fizz level at any time. The keg carbonation calculator gives the pressure to set for your beer temperature and style.

You can prime a keg with sugar if you have no gas to spare. Use about half the bottle amount, because a keg has far less empty space at the top than a case of bottles.

The same priming method works for other drinks. Our guide to priming sugar for cider covers the differences, and if you are unsure about gravity scales, see specific gravity vs Plato vs Brix. To find the calories in your finished beer, try the beer calories calculator.

Frequently Asked Questions

How much priming sugar do I need for 1 gallon of beer?

Use about 28 grams (1 ounce) of corn sugar or 24 grams of table sugar for 1 gallon of beer at a standard fizz level.

How much priming sugar for 5 gallons of beer?

Use about 4.9 ounces (138 g) of corn sugar or 4.2 ounces (119 g) of table sugar for 5 gallons at 2.5 volumes of CO2.

Can I use regular table sugar to prime beer?

Yes. White table sugar works very well and leaves no flavour. Use about 15 percent less than you would use of corn sugar.

How long does beer take to carbonate in bottles?

Most beer carbonates in two to three weeks at 68 to 72 degrees Fahrenheit. Strong beers and cool rooms take longer.

What happens if I add too much priming sugar?

The beer becomes over-carbonated. It may gush when opened, and in bad cases the bottles can burst.

How much sugar do I put in each bottle of beer?

Add about 2.2 grams, or a level half teaspoon, of table sugar to each 12 ounce bottle.

Scroll to Top