Wine Acid Calculator

Use this wine acid calculator to work out exactly how much acid to add to raise the titratable acidity (TA) of your wine or must. Enter the volume, your current and target TA, and the acid you are using to get the grams to add.

How the wine acid calculator works

Acidity is one of the key things that makes a wine taste balanced rather than flat or sharp. Winemakers measure it as titratable acidity, or TA, in grams per litre, expressed as tartaric acid. This wine acid calculator works out how many grams of acid you need to raise your TA from where it is now to where you want it.

The core rule is simple: adding 1 gram per litre of tartaric acid raises TA by 1 gram per litre. So the grams of tartaric acid needed equal your TA increase multiplied by your volume in litres. Malic and citric acid have slightly different weights, so the calculator adjusts the amount when you pick them.

Tartaric acid to add (g) = (target TA minus current TA) multiplied by volume in litres. For 20 litres going from 5.5 to 6.5 g/L, that is 1.0 times 20, or 20 grams.

What is titratable acidity?

Titratable acidity is the total amount of acid in your wine or must that reacts in a standard acid test. It is the number most responsible for how tart or soft a wine tastes on the palate. It is measured by titration with a testing kit and reported in grams per litre as tartaric acid.

TA is not the same as pH. TA measures how much acid is present, while pH measures how strong that acid is and how stable the wine will be against spoilage. A wine can have a healthy TA but a high pH, which is why serious winemakers track both. This tool adjusts TA; always re-check your pH a day or two after an acid addition.

What TA should your wine be?

There is no single right number, because style and taste matter. These ranges are a solid starting point for a balanced wine, measured as tartaric acid.

Wine styleTypical TA (g/L)
Dry white wine6.0 to 7.5
Dry red wine6.0 to 7.0
Rose6.0 to 7.5
Sweet and dessert wine7.0 to 9.0
Country and fruit wine5.5 to 7.5

Sweeter wines usually need a higher TA so the acid balances the sugar. If you plan to back-sweeten, aim toward the top of the range, and plan the sugar with the back-sweetening calculator.

Which acid should you add?

Three acids are used in home winemaking, and they behave a little differently. Most of the time tartaric is the right choice.

AcidBest forNotes
Tartaric acidMost additionsThe main grape acid, stable and the standard choice
Malic acidA crisp, green apple edgeCan be softened later by malolactic fermentation
Citric acidSmall tweaks, fruit winesCan give a fresh citrus lift, but can be converted to off-flavours by some bacteria

For a first wine, reach for tartaric acid. It is the natural grape acid, it is stable, and it is what TA is measured against. The calculator uses the correct weight for each acid so the final TA lands on your target.

How to add acid to wine safely

Adding acid is easy, but a careful method gives the best result and avoids overshooting.

  • Measure first. Test your current TA with a titration kit so you are adjusting from a real number, not a guess.
  • Dissolve the acid. Stir the weighed acid into a small amount of wine until fully dissolved, then mix it into the batch.
  • Add in steps. Add about half the calculated amount, wait, then taste before adding the rest.
  • Adjust early. Many winemakers acidify the must before fermentation so the acid integrates well.
  • Re-test later. Check TA and pH a day or two after the addition, since the wine needs time to settle.

If you are also stabilising the wine, add your sulfite at the same stage using the sulfite calculator, and if you are stabilising before sweetening, add potassium sorbate too.

What if your acid is too high?

Sometimes the problem is the opposite: a sharp, sour wine with too much acid, common in cool-climate grapes and some fruit wines. You cannot fix that by adding acid, so this calculator will prompt you instead.

To lower TA, winemakers use deacidification. Calcium carbonate or potassium bicarbonate neutralise some of the acid, and cold stabilisation drops out tartaric acid as crystals when the wine is chilled. Blending with a lower-acid wine also works. Make these changes in small steps and re-test, because it is easy to strip too much acid and leave the wine flat. For background, see the acids in wine overview on Wikipedia and your local university extension winemaking guides.

A worked example

Say you have 23 litres of a dry white must that tested at 5.0 g/L TA, and you want to bring it up to the 6.5 g/L that suits the style. The increase you need is 1.5 g/L. Using tartaric acid, the maths is 1.5 multiplied by 23, which is about 34.5 grams of tartaric acid.

You would dissolve that acid in a cup of the must, stir it in, and re-test after a day. If you had chosen malic acid instead, the calculator would ask for a little less by weight, because malic is a lighter acid that delivers slightly more acidity per gram. Either way, the finished TA lands on your 6.5 g/L target. Confirm the strength of the finished wine with the ABV calculator and track your sugar with the Brix to specific gravity converter.

Why acid balance matters in wine

Acidity does far more than control taste, though taste is where you notice it first. The right TA makes a wine feel fresh and lively, while too little leaves it flabby and dull and too much makes it harsh and sour. Getting it right is one of the biggest steps from a drinkable homemade wine to a really good one.

Acid also protects the wine. A wine with enough acidity and a lower pH resists spoilage microbes and needs less sulfite to stay stable, so good acid balance and good preservation go hand in hand. It even affects colour in red wines, where lower pH gives brighter, more stable reds.

Because acid touches flavour, stability, and colour, it is worth measuring and adjusting rather than leaving to chance. This is especially true for fruit and country wines, which can start with very different acid levels depending on the fruit. For mead, which has almost no acid of its own, a small acid addition often lifts a flat honey wine, so pair this tool with the mead calculator when planning a batch.

Frequently Asked Questions

How much tartaric acid do I add to wine?

Adding 1 gram per litre of tartaric acid raises titratable acidity by 1 gram per litre. So multiply your TA increase by your volume in litres. To raise 20 litres by 1 g/L, add 20 grams.

What is a good TA for wine?

Most dry wines sit between 6.0 and 7.5 g/L as tartaric acid. Sweet and dessert wines run higher, around 7.0 to 9.0 g/L, so the acid balances the sugar.

Is titratable acidity the same as pH?

No. TA measures how much acid is present, while pH measures how strong it is and how stable the wine is. Track both, and re-check pH a day or two after adding acid.

Which acid is best for adjusting wine?

Tartaric acid is the standard choice because it is the main grape acid, it is stable, and TA is measured against it. Malic and citric acid are used for specific flavour effects.

How do I lower the acidity of my wine?

You cannot lower TA by adding acid. Use deacidification with calcium carbonate or potassium bicarbonate, cold stabilise to drop out tartaric crystals, or blend with a lower-acid wine.

When should I add acid, before or after fermentation?

Many winemakers acidify the must before fermentation so the acid integrates well, then fine-tune the finished wine to taste. Always dissolve the acid first and add in steps.

Scroll to Top